Two questions:

1) I am using my prev AVR as an amplifier for the 970. The AVR has an AVR Trigger input, and the 970 has a trigger output, so I am contemplating using the triggers to turn on the AVR, but I have zero experience with this. Has anyone done this before? It is recommended? If so, what type of cable do I need?

2) I have a Niles Audio IR repeater, and have the flashers glued to the front of the various components. Both the 970 and my AVR have IR Inputs and Outputs. Can I use a use the IR Input instead of the flashers from the Niles Audio (I don't have any doc on the Niles unit). It would be a much cleaner look using the IR Inputs behind.


Thanks, your input is greatly appreciated.