Front Switch Burned out

Any one here have the Light on the Front Power Switch Burn out on this Amp?? I had a bad switched and replaced it With Exact OEM Switch from Digikey part # 360-1995ND and with a Day Pooff burns out, Switch works but lil light inside Doesn't anybody else have this Issue with there 7100 or other Amp??
http://www.digikey.com/scripts/dksearch/dksus.dll?vendor=0&keywords=360-1995-ND

Try contacting Outlaw and maybe ATI. Maybe you just got a bad switch.

I think maybe you bought the wrong switch. The part you bought has an LED for illumination but no current limiting resistor. So if the amp doesn't have a current limiting resistor then I would expect the LED to burn out pretty quickly-which it sounds like it did.

I don't know what Outlaw does to drive that light. The switch you bought is available with 12V AC, 110V AC, 12V DC and various other illumination options. If you have a volt meter you can measure the voltage across the terminals on the switch. Once you know what that is you can order to proper switch.

Hey thanks for the Replies! I didnt think of measuring the voltage but I will, As far as Switch It is Identical to the Original!! Same #'s on it. thats how I found it..I went threw the amp and cleaned it and checked all the Fuses all checks out.. But I will Also call Outlaw, this is still a Great Amp!

"Eman" you called it..I had the Wrong Type,Thanks so much for catching that and got me in right Direction. I reordered from Switches Unlimited and here is the Link if any one else should anyone need to replace there Switch. It is made by NKK Switches KB16CKW01-12-FF
http://www.switchesunlimited.com/part-details.php?PID=153163
http://www.digikey.com/product-detail/en/KB16CKW01-12-FF/KB16CKW01-12-FF-ND/1027275
Now Amp is %100 and Am Happy Camper

Glad to help.