#90859 - 07/07/12 10:47 PM
Set up SR5007 without HDMI
|
Deputy Gunslinger
Registered: 07/22/08
Posts: 6
|
Just got my SR5007 and found that the GUI menu, used for all configuration and setup, only works over HDMI. My TV only has component (yeah, it's older), and I can't see how to use the display on the device to set things up. The manual says to see the display, but all it says is: GUI Menu -> Look at your TV.
Yes, if I had another TV, or even a computer monitor, with HDMI, I could use that. The HDMI to DVI adapters I have don't work with it.
The remote on for my Marantz MA700 also doesn't work, but maybe that will come once I can configure the receiver.
Thanks for any advice.
Edited by Gregg Irwin (07/07/12 10:47 PM)
|
Top
|
|
|
|
|
#90868 - 07/10/12 12:14 PM
Re: Set up SR5007 without HDMI
[Re: Gregg Irwin]
|
Gunslinger
Registered: 05/04/05
Posts: 15
Loc: northeastern US
|
You could try using an hdmi to component converter. They are currently on sale at svideo.com for $69. I have purchased from this vendor before and am very happy with their customer service. Good luck. http://www.svideo.com/hdmicomponent.html
_________________________
rangler
Marantz SR6006 in 7.1 configuration Visio XVT553SV Oppo Digital BDP-83 blu-ray aperion 533-VAC, 532 L/R, 534-SS surround and rears, S10 sub-woofer scientific atlanta 8300HD harmony 900 remote
|
Top
|
|
|
|
|
#90869 - 07/10/12 12:36 PM
Re: Set up SR5007 without HDMI
[Re: rangler]
|
Deputy Gunslinger
Registered: 07/22/08
Posts: 6
|
Thanks Rangler. I considered a converter, but reading reviews on them didn't inspire confidence for this purpose, especially after my HDMI to DVI converter didn't work.
|
Top
|
|
|
|
|
#90873 - 07/10/12 11:20 PM
Re: Set up SR5007 without HDMI
[Re: Gregg Irwin]
|
Gunslinger
Registered: 07/21/06
Posts: 164
Loc: Mission,BC
|
Mr. Irwin, I think you might be able to use the "monitor out" for set up purposes of course it won't overlay for adjustments on the fly and you would have to change inputs on the TV while setting it up. But I could also be wrong.
|
Top
|
|
|
|
|
#90892 - 07/12/12 02:02 PM
Re: Set up SR5007 without HDMI
[Re: nomoneybutgoodsound]
|
Deputy Gunslinger
Registered: 07/22/08
Posts: 6
|
The composite monitor out didn't work either. It seems it's HDMI or nothing.
Outlaws, that would be good to note. And if you have any suggestions for remoting on with the Marantz MA700, that would be great, too. I've tried both the remote out and the 12v DC trigger, and monitor out to the video signal remote in.
|
Top
|
|
|
|
|
#90902 - 07/13/12 07:46 AM
Re: Set up SR5007 without HDMI
[Re: Gregg Irwin]
|
Desperado
Registered: 04/08/08
Posts: 2676
Loc: Columbus,North Carolina
|
Does your TV have DVI inputs? My Samsung has DVI and I used that for a few years with my 990. Seems like a strange setup for Marantz to use. Maybe a call to Outlaw will help.
_________________________
Music system Model 990/7500/Magnepan 1.6 QRs/Technics SL1200 MK2/Aperion S-12 Subwoofer/OWA3/Sony NS75H DVD APC H15 Power Conditioner
TV System Large Advent Loudspeakers/ Polk center/Monoprice surrounds/Panasonic Viera 42 inch/Onkyo HT-RC260/Sony BDP S590/Directv
Home Theater System Onkyo PR-SC886/Outlaw 7125 Klipsch RF-82 L/R,RC-62 center, RB-35 SR/SL, BENQ HT1075, Outlaw LFM1-EX/OPPO BDP-83/Directv Harmony ONE Blue Jeans and Monoprice interconnects APC H15 Power Conditioner
|
Top
|
|
|
|
|
#90910 - 07/13/12 02:45 PM
Re: Set up SR5007 without HDMI
[Re: XenonMan]
|
Deputy Gunslinger
Registered: 07/22/08
Posts: 6
|
No DVI on the TV. It's a Pioneer Elite 710 (13 years old). Will contact Outlaw directly.
Thanks to all who offered suggestions.
|
Top
|
|
|
|
|
#90913 - 07/14/12 04:14 PM
Re: Set up SR5007 without HDMI
[Re: Gregg Irwin]
|
Desperado
Registered: 04/08/08
Posts: 2676
Loc: Columbus,North Carolina
|
It is unlikely that the TV can display a signal better tha 480P without DVI input. Sounds like you have the basis to justify a new TV. A win all around!!
_________________________
Music system Model 990/7500/Magnepan 1.6 QRs/Technics SL1200 MK2/Aperion S-12 Subwoofer/OWA3/Sony NS75H DVD APC H15 Power Conditioner
TV System Large Advent Loudspeakers/ Polk center/Monoprice surrounds/Panasonic Viera 42 inch/Onkyo HT-RC260/Sony BDP S590/Directv
Home Theater System Onkyo PR-SC886/Outlaw 7125 Klipsch RF-82 L/R,RC-62 center, RB-35 SR/SL, BENQ HT1075, Outlaw LFM1-EX/OPPO BDP-83/Directv Harmony ONE Blue Jeans and Monoprice interconnects APC H15 Power Conditioner
|
Top
|
|
|
|
|
#90966 - 07/18/12 11:54 AM
Re: Set up SR5007 without HDMI
[Re: XenonMan]
|
Deputy Gunslinger
Registered: 07/22/08
Posts: 6
|
Outlaw confirmed that HDMI is needed for SR5007 setup to work. They're still finding out about the MA700 control issue. If that doesn't work, I guess it would justify amp(s) too. Now, if I can just convince my bank account of that...
|
Top
|
|
|
|
|
|
0 registered (),
118
Guests and
2
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
|
8,709 Registered Members
88 Forums
11,327 Topics
98,693 Posts
Most users ever online: 476 @ 12/28/22 08:54 PM
|
|
|
|